|
|
|
|
|
|
|
|
 |
|
|
Integro's Complete Welding Preheat System |
|
|
|
 |
|
|
|
Integro's Welding Preheat System is designed to operate on 100 Amp, 460 Volt, 3 phase power input. It is ideal for effective preweld and postweld heating for heavy manufacturing applications like Shipbuilding, Bridge Construction and Mining. Integro offers its Quad System, which powers 24 heaters for larger jobs and its Single System, which powers 6 heaters for smaller more portable jobs. |
|
|
| Each System comes with the following components: |
|
|
|
Quad System
(1) Controller w/ 4 outlets.
(4) Power Streamers
(24 ) Strip Heaters |
|
Single System
(1) Controller w/ 1 outlet
(1) Power Streamer
(6) Strip Heaters |
|
|
|
Submit your RFQ for Welding preheat System |
|
|
|
11667: Quad Controller- 4 Outlet
11705: Single Controller-1 Outlet
The Quad Controller is designed for 100A, 3 phase, 3 pole, 4 wire primary inpute and has 3 pole, 4 wire receptacles for secondary output. You can run 6 heaters per each 4FJ20 panel mount receptacl output for a total of 24 heaters per Controller. The controller's output is rated 48 KW at 460 Volts. The unit is portable and lightweight with dimensions of 20" x 16" x 10". It also comes with Power Available indicators, Blown Fuse indicators and a Disconnect Switch. The unit comes with a Percentage Timer, which controls the heating time of your system and allows you to alter the systems requirements to each application.
The Single Controller is designed for 30A, 3 phase, 4 wire primary input and has a single outlet for secondary output. The Single Controller is designed to operate a total of 6 heaters. The controller's output is rated 12 KW at 460 Volts. This smaller unit is even more portable and lightweight with dimensions of 12" x 12" x 10" and has all of the other features mentioned above.
Both Controllers allow you to run your preheat on a totally dedicated system to maximize efficiency.
|
|
|
|
Controller/Timer |
|
|
|
 |
|
|
Power Streamer |
|
|
|
10921: Power Streamers are used to take the 4 contact, 3 phase power input from the Controller and distribute that power to 6 outlets for each individual strip heater to plug into. Each 3 phase power streamer has a 4MJ20 (male) 4 contact, 3 phase input on 12/4 SOW Cable that plugs into the Controller. There is 50' of cable leading into 6 taps, each spaced 3' apart. Each tap has a 15FR (female) receptacle on 14/3 SOW Cable, 6' long. Total length is 65'. |
|
|
 |
|
|
Strip Heaters |
|
|
 |
 |
Preweld Strip Heaters are made with a cast aluminum shoe and a flat cover to heat your steel application to appropriate preweld and postweld temperatures. They are designed with hanging slots so you can drive a stud and hold them in place. Each strip heater has a 15' input cord witha 15MP3 male connector that plugs into the power streamer. They come in 4 different sizes and can be ordered in any combination to handle your specific apllications. |
|
|
10531-01: 12" Long, 650 W, 460 Volt
10531-02: 18" Long, 1000 W, 460 Volt
10531-03: 24" Long, 1500 W, 460 Volt
10531-04: 36" Long, 2000 W, 460 Volt |
|
|
|
|
|
|
30 Peter Court,New Britain, CT 06051, (Phone) 860.832.8960, (FAX) 860.832.8965, (Email) Sales@Integro-USA.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
