Integro
Integro - Yes, we have it.
Home  |  Careers  |  Site Map  |  Client Login
Power Distribution and Temporary Lighting Equipment Manufacturers Power Distribution , Temporary Lighting and Welding ProductsNewsEventsContact Us

Airfield Lighting

Is your project AIP funded? If so, it has the Buy America clause included in it. It states "manufactured goods used for an AIP-Assisted project must be produced in the United States." Do not accept foreign products for AIP Funded projects.

Make sure you ask for:

Integro
"American Made"
Isolation Transformers

 
Airfield Lighting Isolation Transformers and Connectors
Approved for listing in the FAA Administration Advisory Circular, "Airport Lighting Equipment Certification Program" by ETL
 
 
Contact us at Sales@Integro-USA.com if you are interested in samples of our products!

 

L830 Series Isolation Transformers-60Hz Arrow

Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water.
Airfield Lighting - L830 Series Isolation Transformers-60Hz

L831 Series Isolation Transformers -50 Hz Arrow

Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water.
Airfield Lighting - L831 Series Isolation Transformers -50 Hz

Earthed Isolation Transfomers L830 (60Hz) or L831 (50Hz). Arrow

Integro FAA Approved Series Isolation Transformers are used to isolate high operating voltage for constant current airfield lights in a series circuit. They are encapsulated and designed to operate efficiently while submerged in water.
Airfield Lighting - Earthed Isolation Transfomers L830 (60Hz) or L831 (50Hz).

L-823 Style 1 & 6 Fixture Leads Arrow

Integro Fixture Leads are designed to be an FAA Approved Secondary Plug for all lights used on an airfield runway. They are used with approach, taxiway centerline and edgeway, runway centerline and edgeway, touch down zone and sign lights. They typically come installed on a purchased light, but can also be bought separately for in-field installation. Our Style 1 Fixture Leads can be manufactured to fit any lamp voltage, cable type, length or other special requirements.
Airfield Lighting - L-823 Style 1 & 6 Fixture Leads

L-823 Primary Connector Kits Arrow

Integro Primary Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airport Lighting Cable on primary power circuits.
Airfield Lighting - L-823 Primary Connector Kits

L-823 Primary Leads-Style 2&9 Arrow

Integro Primary Leads are used for custom installations that require connection to primary power circuits using a factory molded L-823 Style 2 male, or Style 9 female connector. Both connectors are molded to #8 AWG Airport Lighting Cable.
Airfield Lighting - L-823 Primary Leads-Style 2&9

L-823 Secondary Connector Kits Arrow

Both types of Integro male and female Secondary Connector Kits are molded in synthetic rubber for superior dielectric strength, and to ensure watertight connection in the field.
Airfield Lighting - L-823 Secondary Connector Kits

L-823 Secondary Leads-Style 7&8 Arrow

Integro Secondary Receptacles are used for custom installations that require a connection to secondary power circuits using either a factory molded L-823 Style 7 (Straight Design) or a Style 8 (Ball Design) female connector.
Airfield Lighting - L-823 Secondary Leads-Style 7&8

Secondary Extension Cords Arrow

Integro Secondary Extension Cords are used for making above or below ground connections between taxiway, runway and sign lights, PAPIís, VASIís and other specialty lights, and the Series Isolation Transformer, where they are located at different positions on the airport runway.
Airfield Lighting - Secondary Extension Cords

Voltage Transformer Arrow

Integro Voltage Transformers are used in parallel circuits on airfields to step down the utility (line) voltage to run 6.6 Amp airfield lighting products. They are encapsulated and designed to operate efficiently while submerged in water. They are approved to operate between -55 C and + 65 C and can be installed above ground, in metal cans or directly buried.
Airfield Lighting - Voltage Transformer

L-823 Primary Colored Complete Kits Arrow

Integro Primary Colored Connector Kits are used to install Isolation Transformers into series circuits, and to make serviceable splice connections or test points in L-824 Airport Lighting Cable on primary power circuits.
Airfield Lighting - L-823 Primary Colored Complete Kits

L-823 Primary Connector Kits Style 3&10 -- For screened (shielded) cable Arrow

Integro's "Complete Kit" Shielded Primary Connector Kits are installed with screened (shielded) cable and are used to terminate and complete the connection of two shielded cables.
Airfield Lighting - L-823 Primary Connector Kits Style 3&10 -- For screened (shielded) cable

Integro is now offering training on the installation of the...

 

 Check out who Integro has trained! Click here to learn more.

Please contact Sales at sales@integro-usa.com for more details.

 
 
INTEGRO IS NOW OFFERING CUSTOM ISOLATION TRANSFORMERS AND CABLE ASSEMBLIES!
 
The map below indicates which countries are using Integro's products
 
 

 

 

Web Solutions Connecticut CT Web Design & Development Company